Toshiba Customer FAQ

To set your Toshiba TV to automatically turn on to the satellite input, go to the TV's settings menu. Look for the 'Inputs' or 'Source' settings. Some models allow you to set a default input when the TV powers up. Save your changes. If your model doesn't have this feature, you might need to select the satellite input manually each time. Each model may have different capabilities, so check your user manual for specific instructions.

On a Toshiba Fire TV 65", the power inlet is typically located on the back of the television, near the bottom left or right side when facing the rear of the unit.

The Channel Scan button is typically found in the TV's setup menu. However, the specific steps can vary slightly depending on your Toshiba TV model. Generally, you would press the "Menu" button on your remote, navigate to the "Setup" or "Settings" option, then choose "Channel Setup" or "Antenna" then "Channel Scan" or "Auto-Tune". Follow the prompts to scan for channels. If the procedure doesn't work, check your TV's manual for specific instructions. Please note that your TV must be connected to an antenna or cable outlet to perform a channel scan.

Troubles with the Toshiba Fire TV remote typically stem from issues with the batteries or the pairing process. First, check to ensure the batteries are installed correctly and aren’t depleted. If the issue persists, you might need to re-pair the remote with your TV. To do this, press the Home button on your remote for about 10 seconds. This should send it into pairing mode and connect it to your TV. If your remote still doesn't work after trying these steps, it might be damaged and will likely need to be replaced.