Whirlpool Preguntas frecuentes de los clientes

It sounds like your washer may need to be reset. To do this, try unplugging the machine for a few minutes, then plug it back in. This can sometimes restore functionality. If the door remains locked, most washers have a manual release for the door lock, typically located near the filter or behind a panel. Consult your user manual for specific instructions related to your model. If the issue persists, further troubleshooting may be necessary.

To set the date and time on your Whirlpool stove model WFES7530RZ0, follow these steps: 1. Press the "Clock" or "Settings" button on the control panel. 2. Use the "+" or "-" buttons to adjust the hour. 3. Press "Clock" or "Settings" again to confirm and move to the minute setting. 4. Adjust the minutes using the "+" or "-" buttons. 5. Press "Clock" or "Settings" once more to finalize the setting. The display should now show the correct date and time. Refer to the user manual for any model-specific instructions.

Whirlpool typically offers a limited warranty on refrigerator compressors, which can vary by model. Generally, the warranty on the compressor may last up to 10 years from the date of purchase for certain models. It's important to verify the specific warranty terms for your refrigerator model, as details may differ.

If the stove top is functioning but the oven won't ignite, it may be due to a few reasons such as a faulty igniter, gas supply issue, or a problem with the oven’s control board. Make sure the oven settings are correct and that the gas supply is turned on. If the igniter is not glowing or appears damaged, it may need replacement. For further troubleshooting or repairs, it’s best to consult a professional technician.

It's possible that air got into the line when you shut your water off, which could cause the ice maker to stop working. To remedy this, you might need to reset the ice maker system. Typicall,y you can complete this process by turning off the ice maker (usually a switch or lever), waiting for a few minutes, and then turning it back on. Normally an ice maker may take about 24 hours to produce ice after being reset. If this doesn't help, the water line to the ice maker could potentially be clogged, and it might need to be cleaned or replaced.